Call us at 0086 15924139666

Our Product Detail

Welcome to our website!

_
_

copper conical fermenter fermenter insulation

The brite tank is used for carbonating the beer and the beer is then either served direct from this vessel via beer lines to the tap (commonly seen in brew pubs) or is kegged and/or bottled (as in a microbrewery).  In brewpubs the number of serving tanks generally determines the number of different beers on tap. 

Products Details

This is the description of copper conical fermenter fermenter insulation

The brite tank is used for carbonating the beer and the beer is then either served direct from this vessel via beer lines to the tap (commonly seen in brew pubs) or is kegged and/or bottled (as in a microbrewery).  In brewpubs the number of serving tanks generally determines the number of different beers on tap. 


The cooling system is a dimple jacket with insulated Polyurethane filled.  All tanks are designed for up to 14.7 PSI and tested at 30 PSI.  The inside of the tanks are polished to Ra<=22um and the outside is a brushed / Satin finish.

 

Features:

-   100% Stainless Steel 304 Construction;

-   Dimple plate jacket for glycol cooling ( cover body & bottom);

-   2” PU foam Insulation;

-   Tanks designed for up to 14.7 PSI and tested at 30 PSI ;

-   Inside of the tanks are polished to Ra>.22um & the outside is a brushed / Satin finish.

-   Shadowless Oval Manway open inward and outward;

-   CIP with Spray Ball and downtube;

-   Thermometer (PT-100) in thermowell at side;

-   Sample valve ;

-   Bottom outlet with TC Butterfly valve;

-   Adjustable legs with pads;


Optional Features:


-   Pressure Relief/Vacuum Valve Available

-   Rotating Racking Arm with TC Butterfly Valve;

-   Carbon Stone Available

-   Extra Ferules installed per ferule 1" thru 3" sizes

-   Sight Level Glass with 2 valves Installed;

-   Other Manway style; 

-   Single Layer without jacket & insulation;

 

copper conical fermenter
copper conical fermenter

fermenter insulation
fermenter insulation
copper conical fermenter 
fermenter insulation
copper conical fermenter fermenter insulation

Introduction of copper conical fermenter in sealing
The mechanical seal is a rotary mechanical oil seal device. Such as stirred tanks, centrifuges, reactors and compressors and other equipment. Since the transmission shaft penetrates the inside and outside of the equipment, a circumferential clearance exists between the shaft and the equipment. The medium in the equipment leaks out through the clearance. If the pressure in the equipment is lower than the atmospheric pressure, the air leaks into the equipment, so there must be a Stop leaking shaft seals. There are many types of shaft seals. Because mechanical seals have the advantages of low leakage and long life, mechanical seals in the world today are the most important shaft sealing methods in these devices. Mechanical seals, also known as face seals, are defined in the relevant national standards: "At least one pair of end faces perpendicular to the axis of rotation are held together by the action of the fluid pressure and the compensation mechanism's spring force (or magnetic force) and the auxiliary seal. A device that prevents fluid leakage that is formed by relative sliding.A mechanical seal is a mechanical part that has a high degree of accuracy. Its correct installation and operation have a great influence on its service life.
Looking forward to your inquiry for this copper conical fermenter fermenter insulation 

LEAVE A MESSAGE