Call us at 0086 15924139666

Our Product Detail

Welcome to our website!

_
_

conical fermenter manufacturers cylindro conical fermenter

The unitank/fermenter is the most common style of fermenting vessel. Yeast is added to the wort and controlled fermentation takes place. Fermentation times vary greatly depending upon beer style, type of yeast and fermentation temperatures. The size and number of fermenters are two major factors that determine the annual production of a brewery.

Products Details

This is the description of conical fermenter manufacturers cylindro conical fermenter

Unitank/Fermenter

The unitank/fermenter is the most common style of fermenting vessel. Yeast is added to the wort and controlled fermentation takes place. Fermentation times vary greatly depending upon beer style, type of yeast and fermentation temperatures. The size and number of fermenters are two major factors that determine the annual production of a brewery.

All tanks come standard with 25% head space on top of working volume.  All Cone come standard with a Racking Arm.
The cooling system is a dimple jacket with insulated Polyurethane filled.  All tanks are designed for up to 14.7 PSI and tested at 30 PSI.

Features:

 - 100% Stainless Steel 304 Construction;

 - Dish top cover & Cylinder Body & 60-90°Conical Bottom;

 -Dimple plate jacket for glycol cooling (cover body & bottom);

 - 2" PU Foam Insulation;

 - Tanks designed for up to 14.7 PSI and tested at 30 PSI ;

  - Inside of the tanks are passivation polished & the outside is a brushed

 - Shadowless Oval Manway open inward and outward;

 - CIP with Spray Ball and downtube;

 - Thermometer (PT-100) in thermowell at side;

  - Sample valve ;

 - Rotating Racking Arm with TC Butterfly Valve;

  - Bottom outlet with TC Butterfly valve;

  - Adjustable legs with pads;

Optional Features:

 - Pressure Relief/Vacuum Valve Available

- Carbon Stone Available

- Extra Ferules installed per ferule 1" to 3" Size 

- Sight Level Glass with 2 valves Installed;

- Other Manway style; 

conical fermenter manufacturers
conical fermenter manufacturers

cylindro conical fermenter
cylindro conical fermenter
conical fermenter manufacturers 
cylindro conical fermenter
conical fermenter manufacturers cylindro conical fermenter

Technical requirements for cylindro conical fermenter
1 The raw material quality and saccharification effect should be effectively controlled. The composition of each batch of wort should be uniform. If the composition of each batch of wort differs too much, it will affect the reproduction and fermentation of yeast.
The capacity of 2 large tanks should be compatible with the amount of cold wort for each saccharification and the number of saccharifications per day. It requires that one can be filled within 16 hours, and no more than 24 hours. The cold wort entering the tank should be removed as far as possible.
3 The temperature control of the cold wort should consider the time interval and the number of full cans of each wort into the tank. If the interval time is long and the number of times is large, the temperature of the wort may be increased batch by batch, and the first batch and the second batch may also be considered. Add yeast, the next batch of yeast will be added in a certain proportion, the proportion of addition from small to large.
4 The control of dissolved oxygen in the cold wort can be determined according to the amount of yeast added and the state of yeast reproduction. Generally, each batch of cold wort should be oxygenated as required. The dissolved cold wort's dissolved oxygen should not be lower than 8 mg/L.
5 The control of the fermentation temperature should be kept relatively stable and the temperature control should be controlled automatically.
6 The fermenter is best made of stainless steel for easy cleaning and sterilization. When carbon steel is used to make the fermenter, the paint layer should be kept uniform and strong. The fermentation tank should be equipped with a high-pressure spray device, and the spray pressure should be controlled to 0.39 MPa to 0.49 MPa.
Looking forward to your inquiry for this conical fermenter manufacturers   cylindro conical fermenter

LEAVE A MESSAGE